Evaluation of Tensile Bond Strength of Metallic Prefabricated Posts Cemented with Different Luting Agents

Abstract Objective: To assess the tensile bond strength of prefabricated metal posts cemented with different luting agents. Material and Methods: Fifty single-rooted endodontically treated human teeth had their crowns cut, mounted into acrylic-resin blocks and then an 8mm depth post space were prepared. Prefabricated cylindrical metal posts were cemented using different luting agents: a zinc phosphate cement (SS White), a conventional glass ionomer cement (Vidrion C), two resin-modified glass ionomer cements (Vitremer and RelyX Luting 2) and a resin cement (RelyX ARC). Samples were stored in distilled water for seven days and then submitted to a tensile bond strength test until complete dislocation of the post. One-way analysis of variance and Tukey test for pairwise multiple comparisons were used to evaluate differences between luting agents. Results: Tensile bond strength was 563.88±203.41 N for zinc phosphate cement, 336.86 ± 137.64 N for Vidrion C, 515.24 ± 239.48 N for Vitremer, 828.47±433.99 N for RelyX Luting 2 and 1262.51 ± 356.29 for RelyX ARC. The Relyx ARC presented the highest tensile bond strength regard the luting agent tested (p< 0.05). Conclusion: RelyX ARC presented the higher tensile bond strength compared to the other luting agents evaluated.

Cytotoxicity, Morphology and Chemical Composition of Two Luting Cements: An in Vitro Study

Abstract Objective: To assess the cytotoxicity, surface morphology, elemental compositions and chemical characterization of two commonly used luting cement. Material and Methods: The two luting types of cement used were Elite Cement® and Hy-Bond Resiglass®. Freshly mixed (n=6) and set form (n=6) of each cement was placed in medium to obtain extracts. The extract from each sample was exposed to L929 mouse fibroblasts (1x104cells/well). Alamar Blue Assay assessed cell viability. Surface morphology and elemental composition were evaluated using scanning electron microscopy and energy dispersive spectroscopy. The chemical characterization was performed by Fourier Transform Infrared Spectroscopy. One-way ANOVA and post-hoc Tukey analysis were conducted to assess results. Results: Hy-Bond Resiglass® was the more cytotoxic of the two types of cement in both freshly mixed (68.10 +5.16; p<0.05) and set state (87.58 +4.86; p<0.05), compared to Elite Cement® both freshly mixed (77.01 +5.45; p<0.05) and set state (89.39 +5.66; p<0.05). Scanning electron microscopy revealed a more irregular and porous structure in Hy-Bond Resiglass® compared to Elite Cement®. Similarly, intense peaks of aluminium, tungsten and fluorine were observed in energy dispersive spectroscopy in Hy-Bond Resiglass. Conclusion: All these three elements (aluminium, tungsten and fluorine) have cytotoxic potential. The Fourier transform infrared spectroscopy revealed the presence of hydroxyethyl methacrylate in Hy-Bond Resiglass®, which has a cytotoxic potential.

Fracture resistance of metal-ceramic crown copings cemented to two types of intra-radicular posts / Resistência à fratura de copings de coroa metalocerâmica cimentados sobre dois tipos de retentores intrarradiculares

Introduction: Endodontically treated teeth are more susceptible to root fracture than vital teeth. In order to reduce the risk of fracture, the use of intra-radicular posts and crowns is indicated. However, their own fracture resistance remains unclear. Objective: To analyze the behavior of metal-ceramic crown copings cemented to two types of intra-radicular posts under tensile stress. Material and method: Sixteen metal-ceramic crown copings cemented with zinc phosphate cement to cast metal posts and cores (group 1, n = 8) or with self-adhesive resin cement to glass-fiber posts rebased with composite resin (group 2, n = 8) were subjected to tensile testing after endodontic treatment and standardized preparation. Failure occurred when the crown coping and/or post-core assembly fractured and/or detached. Result: In group 1, after the application of a mean tensile load of 46.83 N, 7 crown copings and metal cores separated as a whole, while in 1 specimen the coping detached from the metal core. In group 2, a mean tensile load of 127.68 N resulted in glass-fiber post fracture, and in 1 case the entire crown-post-core assembly was detached. Tensile strength differed significantly between the two groups (p = 0.0085). Conclusion: Our findings suggest that metal-ceramic crown copings cemented with self-adhesive resin cement show strong adhesion to composite resin cores associated with glass-fiber posts, thus providing a safe alternative to the use of cast metal posts and cores.

Introdução: Os dentes tratados endodonticamente são mais suscetíveis à fratura radicular do que os dentes vitais. Para reduzir o risco de fratura, indica-se o uso de coroas e retentores intrarradiculares. No entanto, ainda não está clara a resistência dessas estruturas a fraturas. Objetivo: Analisar o comportamento de copings de coroa metalocerâmica cimentados com dois tipos de retentores intrarradiculares sob tensão de tração. Material e método: Dezesseis copings de coroa metalocerâmica cimentados com cimento de fosfato de zinco para núcleos e pinos de metal fundido (grupo 1, n= 8) ou com cimento resinoso autoadesivo para núcleos de resina composta com pinos de fibra de vidro (grupo 2, n= 8) foram submetidos a testes de tração após tratamento endodôntico e preparo padronizado. Houve falha quando o coping da coroa e/ou a estrutura pino-núcleo se quebrou e/ou se soltou. Resultado: No grupo 1, após a aplicação de uma carga de tração média de 46,83 N, 7 copings e núcleos metálicos se separaram completamente, enquanto em 1 espécime o coping se soltou do núcleo metálico. No grupo 2, uma carga de tração média de 127,68 N resultou em fratura do pino de fibra de vidro, e em 1 caso toda a estrutura coroa-pino-núcleo se soltou. A resistência à tração foi significativamente diferente entre os dois grupos ( P= 0,0085). Conclusão: Nossos achados sugerem que copings de coroa metalocerâmica cimentados com cimento resinoso autoadesivo apresentam forte adesão aos núcleos de resina composta associados aos pinos de fibra de vidro, proporcionando uma alternativa segura ao uso de retentores de metal fundido.

Effects of Hybrid Coat on shear bond strength of five cements: an in vitro study

PURPOSE: To evaluate the sealing performance of Hybrid Coat and its influence on the shear bond strength of five dentin surface cements. MATERIALS AND METHODS: Six premolars were pretreated to expose the dentin surface prior to the application of Hybrid Coat. The microscopic characteristics of the dentinal surfaces were examined with scanning electron microscopy (SEM). Then, 40 premolars were sectioned longitudinally, and 80 semi-sections were divided into a control group (untreated) and a study group (treated by Hybrid Coat). Alloy restoration was bonded to the teeth specimen using five different cements. Shear bond strength was measured by the universal testing machine. The fracture patterns and the adhesive interface were observed using astereomicroscope. RESULTS: SEM revealed that the lumens of dentinal tubules were completely occluded by Hybrid Coat. The Hybrid Coat significantly improved the shear bond strength of resin-modified glass ionomer cement (RMGIC) and resin cement (RC) but weakened the performance of zinc phosphate cement (ZPC), zinc polycarboxylate cement (ZPCC) and glass ionomer cement (GIC). CONCLUSION: Hybrid Coat is an effective dentinal tubule sealant, and therefore its combined use with resin or resin-modified glass ionomer cements can be applied for the prostheses attachment purpose.

Effect of adhesive luting on the fracture resistance of zirconia compared to that of composite resin and lithium disilicate glass ceramic

OBJECTIVES: The purpose of this study was to evaluate the effect of adhesive luting on the fracture resistance of zirconia compared to that of a composite resin and a lithium disilicate glass ceramic. MATERIALS AND METHODS: The specimens (dimension: 2 mm × 2 mm × 25 mm) of the composite resin, lithium disilicate glass ceramic, and yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) were prepared. These were then divided into nine groups: three non-luting groups, three non-adhesive luting groups, and three adhesive luting groups, for each restorative material. In the non-luting groups, specimens were placed on the bovine tooth without any luting agents. In the non-adhesive luting groups, only zinc phosphate cement was used for luting the specimen to the bovine tooth. In the adhesive luting groups, specimens were pretreated, and the adhesive luting procedure was performed using a self-adhesive resin cement. For all the groups, a flexural test was performed using universal testing machine, in which the fracture resistance was measured by recording the force at which the specimen was fractured. RESULTS: The fracture resistance after adhesive luting increased by approximately 29% in the case of the composite resin, 26% in the case of the lithium disilicate glass ceramic, and only 2% in the case of Y-TZP as compared to non-adhesive luting. CONCLUSIONS: The fracture resistance of Y-TZP did not increased significantly after adhesive luting as compared to that of the composite resin and the lithium disilicate glass ceramic.

Influência do agente cimentante e desajuste interno na adaptação marginal de coroas em resina nanocerâmica / Influence of the cement agent and internal mismatch in the marginal adaptation of nanoceramic resins crowns

A adaptação marginal é um dos requisitos fundamentais para a longevidade e o sucesso das restaurações. O objetivo desse estudo foi avaliar a influência do desajuste interno associado à diferentes agentes cimentantes na desadaptação marginal de coroas em resina nanocerâmica (Lava Ultimate 3M ESPE) confeccionadas pelo sistema CAD-CAM. A partir do escaneamento de um preparo de coroa total em um pré-molar, foram obtidos 36 modelos em metal. Esses foram divididos em seis grupos de acordo com o desajuste interno (70 µm ou 100 µm) e o cimento (Fosfato de zinco- SS White, Cimento de ionômero de vidro- Ketac Cem 3M/ESPE e Cimento resinoso- Relyx Ultimate 3M/ESPE). Após escaneamento de todos os modelos as coroas foram confeccionadas a partir da fresagem de blocos de resina nanocerâmica (Lava Ultimate 3M/ESPE). Com auxílio de microscópio óptico comparador (40X) foram medidas as desadaptações marginais prévia e posteriormente à cimentação, sendo considerados 8 pontos ao longo do término em todas as faces do corpo de prova. Os valores obtidos após serem submetidos aos testes two-way anova e teste t, demonstraram que as coroas confeccionadas com desajuste interno de 70 µm apresentam desadaptação marginal inferior estatisticamente significante às coroas com desajuste interno de 100 µm. Para o desajuste interno de 70 µm o grupo do cimento fosfato de zinco apresentou o menor gap marginal, sendo que este valor não foi estatisticamente diferente em relação ao grupo do Ketac Cem. Ainda com esse desajuste, o grupo do Ketac Cem não apresentou diferença estatística significante em relação ao grupo do Relyx Ultimate, no entanto esse último promoveu "gap" marginal estatisticamente maior em relação ao grupo do cimento fosfato de zinco. Para o desajuste interno de 100 µm não houve diferença estatisticamente significante no "gap" marginal entre os três cimentos avaliados. O presente estudo demonstrou através da metodologia utilizada, que a menor desadaptação marginal observada nas restaurações de Lava Ultimate, foi proveniente do desajuste interno de 70 µm. Neste grupo os cimentos de fosfato de zinco e de ionômero de vidro demonstraram melhor comportamento comparado ao cimento resinoso, embora o cimento de ionômero de vidro numericamente, mas não estatisticamente tenha apresentado resultado inferior ao do fosfato de zinco

The marginal adaptation is one of the basic requirements for the longevity and success of restorations. The aim of this study was to evaluate the influence of the internal imbalances associated with different luting agents on marginal leakage of crowns Nanoceramic resin ( Lava Ultimate 3M ESPE) made by CAD-CAM system. From the scanning of a full crown preparation in a pre molar were obtained 36 metal models. These were divided into six groups according to the internal imbalances ( 70 or 100 micrometres) and cement (SS White Zinc phosphate, glass ionomer cemet Ketac Cem 3M/ Espe and resinous cement Relyx Ultimate 3M / Espe). After scanning all models crowns were made from milling Nanoceramic resin blocks (Lava Ultimate 3M / Espe). With the aid of optical comparator microscope (40X) were measured prior marginal mismatches and after the cementation, being considered 8 points along the end in all specimen faces. The values were submitted to ANOVA two-way test and t test. Results showded that crowns made with internal imbalances of 70 uM show statistically significant lower marginal leakage to the crows with internal imbalances of 100 micrometres. For the internal imbalances 70 uM zinc phosphate cement group showed the lowest "gap" marginal, and this figure does not show a statistically significant difference compared to Ketac Cem gropu. Even with this misfit, Ketac Cem group showed no statistically significant difference in relation to Relyx Ultimate group, though the latter showed a statistically significant difference compared to zinc phosphate cement group. For the internal imbalances of 100 micrometres there was no statistically significant difference in the "gap" marginal among the three cements. This study demostrated through the methodology used, the lower marginal leakage oberved in Lava Ultimate restorations, was from the inner misfit 70 micrometers...

A literature review on cementation of implant prosthesis / 대한치과보철학회지

Cement-retained implant prosthesis has several advantages in the esthetic and occlusal aspects. However, the difficulty of the retrievability and the possibility of peri-implantitis induced by the cement excess would be a threatening factor to the implant prognosis. Peri-implantitis resulting from the remaining cement could occur later on to the patients with periodontitis history. Retention can be controlled by selecting the right cement type. Retention of the cement was the strongest in the resin cement, followed by resin modified glass ionomer cement, poIycarboxylate cement, zinc phosphate cement and glass ionomer cement. Retention of the provisional cement weakened after thermocycling. Other factors such as the abutment number, abutment alignment, height and taper of the abutment can also affect the total retention. To the success of the cement-retained prosthesis, it's important to select the right cement for the clinical purpose. The prosthesis should be fabricated in accordance with the biomechanical requirements. The prosthesis should be cemented with the techniques to reduce the excess cement as much as possible. In addition, the excess cement should be identified using the radiography and carefully removed.

Comparison of micro CT and cross-section technique for evaluation of marginal and internal fit of lithium disilicate crowns / 대한치과보철학회지

PURPOSE: The purpose of this study was to evaluate the adaptation of lithium disilicate crowns fabricated by CAD-CAM (computer aided design-computer aided manufacturing) and heat-press technique to compare two different measurement methods in assessing fit of the ceramic crowns: micro CT and cross-section technique. MATERIALS AND METHODS: A prepared typodont mandibular molar for ceramic crown was duplicated and ten dies were produced by milling the PMMA (polymethylmethacrylate) resin. Ten vinyl polysiloxane impressions were made and stone casts were produced. Five dies were used for IPS e.max Press crowns with heat-press technique. The other five dies were used for IPS e.max CAD crowns with CAD-CAM technique. Ten lithium disilicate crowns were cemented on the resin dies using zinc phosphate cement with finger pressure. The marginal and internal fits in central buccolingual plane were evaluated using a micro CT. Then the specimens were embedded and cross-sectioned and the marginal and internal fits were measured using scanning electronic microscope. The two measurement methods and two manufacturing methods were compared using Mann-Whitney U test (SPSS 22.0). RESULTS: The marginal and internal fit values using micro CT and cross-section technique were similar, showing no significant differences. There were no significant differences in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique. CONCLUSION: Both micro CT and cross-section technique were acceptable methods in the evaluation of marginal and internal fit of lithium disilicate crown. There was no difference in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique except occlusal fit.

Biomechanical three-dimensional finite element analysis of monolithic zirconia crown with different cement type

PURPOSE: The objective of this study was to evaluate the influence of various cement types on the stress distribution in monolithic zirconia crowns under maximum bite force using the finite element analysis. MATERIALS AND METHODS: The models of the prepared #46 crown (deep chamfer margin) were scanned and solid models composed of the monolithic zirconia crown, cement layer, and prepared tooth were produced using the computer-aided design technology and were subsequently translated into 3-dimensional finite element models. Four models were prepared according to different cement types (zinc phosphate, polycarboxylate, glass ionomer, and resin). A load of 700 N was applied vertically on the crowns (8 loading points). Maximum principal stress was determined. RESULTS: Zinc phosphate cement had a greater stress concentration in the cement layer, while polycarboxylate cement had a greater stress concentration on the distal surface of the monolithic zirconia crown and abutment tooth. Resin cement and glass ionomer cement showed similar patterns, but resin cement showed a lower stress distribution on the lingual and mesial surface of the cement layer. CONCLUSION: The test results indicate that the use of different luting agents that have various elastic moduli has an impact on the stress distribution of the monolithic zirconia crowns, cement layers, and abutment tooth. Resin cement is recommended for the luting agent of the monolithic zirconia crowns.

Capacidad de sellado de tres agentes cementantes para restauraciones coronarias indirectas / Sealing ability of three luting agents used for cementation of indirect coronal restorations

Objetivo: comparar ex vivo, por medio de un modelo de filtración bacteriana, la capacidad de sellado de un ionómero vítreo modificado con resinas, de un ionómero vítreo convencional y de un cemento de fosfato de cinc, utilizados para la cementación de coronas coladas (AU). Materiales y métodos: un total de 30 premolares humanos sanos, extraídos, fueron preparados de forma estandarizada para recibir una corona metálica con terminación en chamfer sobre dentina. Se realizaron impresiones, se vaciaron en densita tipo IV, se enceraron y se colaron en aleación de oro tipo III. Luego fueron separadas al azar en tres grupos de 10 (n=10) especímenes cada uno. Las coronas del grupo 1 fueron cementadas con Rely-X Luting Plus (3M/ESPE); y las del grupo 2, con Ketac-Cem (3m/ESPE); y las del grupo 3 (control), con el cemento de fosfato de cinc Harvard Cement (Harvard Debtal International GmbH, Hoppengarten, Alemania). Todos los especímenes fueron termociclados. Posteriormente, la superficie metálica oclusal fue reducida 1 mm hasta exponer la dentina, y las muestras se esterilizaron en autoclave. El proceso de filtración se realizó por medio de un sistema de doble cámara con medio de cultivo. El medio de la cámara superior se inoculó con E. faecalis y el sistema fue incubado durante 60 días. En la cámara inferior, la filtración bacteriana se controló diariamente. Los datos registrados fueron analizados por medio de las pruebas de Kaplan-Meyer y de Fischer, con un nivel de significación de P<0,05. Resultados: el tiempo de supervivencia para Rely-X Luting Plus no pudo ser estimado, ya que fue superior a los 60 días, tiempo máximo de duración de la experiencia. Para Ketac-Cem fue de 60 días, con un intervalo de confianza (95 por ciento) de 29,6-90,4. Y para Harvard Cement fue de 40 días, con un intervalo de confianza de 32,6-47,4. Las diferencias entre los grupos fueron estadísticamente significativas. Conclusión: Rely-X Plus demostró una capacidad de sellado superior.

Effect of ultrasonic tip designs on intraradicular post removal

OBJECTIVES: To evaluate the effect of different ultrasonic tip designs on intraradicular post removal. MATERIALS AND METHODS: The crowns of forty human canine teeth were removed, and after biomechanical preparation and filling, the roots were embedded in acrylic resin blocks. The post spaces were made, and root canal molding was performed with self-cured acrylic resin. After casting (Cu-Al), the posts were cemented with zinc phosphate cement. The specimens were randomly separated into 4 groups (n = 10), as follows: G1 - no ultrasonic vibration (control); G2 - ultrasonic vibration using an elongated cylindrical-shaped and active rounded tip; G3 - ultrasonic vibration with a flattened convex and linear active tip; G4 - ultrasonic vibration with active semicircular tapered tip. Ultrasonic vibration was applied for 15 seconds on each post surface and tensile test was performed in a Universal Testing Machine (Instron 4444 - 1 mm/min). RESULTS: G4 presented the highest mean values, however, with no statistically significant difference in comparison to G3 (P > 0.05). G2 presented the lowest mean values with statistically significant difference to G3 and G4 (P < 0.05). CONCLUSIONS: Ultrasonic vibration with elongated cylindrical-shaped and active rounded tip was most effective in reducing force required for intraradicular post removal.

microleakage of polycarboxylate, glass ionomer and zinc phosphate cements for stainless steel crowns of pulpotomized primary molars

Microleakage in Stainless Steel Crowns [SSC] margins leads to seepage of oral fluids and bacteria and it is one of the reasons for treatments failures. The aim of this study was to assess the effect of zinc phosphate, glass lonomer and polycarboxylate cements on microleakage of stainless steel crowns for primary pulpotomized molar teeth. In this experimental in vitro study, 60 extracted primary molar teeth were randomly divided in to three groups [n=20]. Stainless steel crowns were fitted for each tooth after pulpotomy procedures. Crowns were luted with a zinc phosphate, glass ionomer or polycarboxylate cement. All specimens were stored in 100% humidity at 37° C for 1 hour and termocycled 500 times [5°C - 55°C] with a 30 seconds dwell time and then immersed in 0.5% basic fuschin solution for 24 hours. The specimens were sectioned buccolingually and each section was evaluated for microleakage under a stereomicroscope. In zinc phosphate group 45% of spicemens and in glass ionomer group there was 5% of spicemens showed leakage extending on to occlusal aspect and in polycarboxylate group none of the spicemens had this situation. According to the kruskal wallis test in all groups there were significant differences in microleakage [p< 0.001]. The use of zinc phosphate cement resulted in the highest percentage of microleakage. The microleakage of SSCs cemented with polycarboxylate and glass ionomer were similar

Comparison of the retention of the full veneer casted gold crowns with varying convergence angle, crown length and dental cements / 대한치과보철학회지

PURPOSE: The aim of this research was to establish the effect and variation in differing convergence angle and length of abutment on the retention of full veneer casted gold crown. MATERIALS AND METHODS: Two different length,5 mm and 10 mm in height with convergence angles of 5, 10, 15 and 25 degrees crowns were fabricated. Cementation was done using cements; zinc phosphate cement (Fleck's zinc phosphate cement), resin-modified glass ionomer cement (Vitremer) and resin cement (Panavia 21). These were tested for tensile force at the point of separation by using Instron Universal Testing Machine. Statistical analysis was done by SAS 6.04 package. RESULTS: In all cements the mean retention decreased with significant difference on increase of convergence angle (P<.05). Increase in every 5 degree-convergence angel the retention rate decreased with resin-modified glass ionomer cement of 15.9% and resin cement of 14.8%. With zinc phosphate cement, there was largest decreasing rate of mean retention of 25.5% between convergence angles from 5 degree to 10 degree. When the crown length increased from 5 mm to 10 mm, the retention increased with the significant difference in the same convergence angle and in all types of cement used (P<.05). CONCLUSION: The retention was strongly dependent on geometric factors of abutment. Much care is required in choosing cements for an optimal retention in abutments with different convergence angles and crown lengths.

Influence of core-finishing intervals on tensile strength of cast posts-and-cores luted with zinc phosphate cement

The core finishing of cast posts-and-cores after luting is routine in dental practice. However, the effects of the vibrations produced by the rotary cutting instruments over the luting cements are not well-documented. This study evaluated the influence of the time intervals that elapsed between the cementation and the core-finishing procedures on the tensile strength of cast posts-and-cores luted with zinc phosphate cement. Forty-eight bovine incisor roots were selected, endodontically treated, and divided into four groups (n = 12): GA, control (without finishing); GB, GC, and GD, subjected to finishing at 20 minutes, 60 minutes, and 24 hours after cementation, respectively. Root canals were molded, and the resin patterns were cast in copper-aluminum alloy. Cast posts-and-cores were luted with zinc phosphate cement, and the core-finishing procedures were applied according to the groups. The tensile tests were performed at a crosshead speed of 0.5 mm/min for all groups, 24 hours after the core-finishing procedures. The data were subjected to one-way analysis of variance (ANOVA) and Tukey's test (α = 0.05). No significant differences were observed in the tensile strengths between the control and experimental groups, regardless of the time interval that elapsed between the luting and finishing steps. Within the limitations of the present study, it was demonstrated that the core-finishing procedures and time intervals that elapsed after luting did not appear to affect the retention of cast posts-and-cores when zinc phosphate cement was used.

Comparison of different ultrasonic vibration modes for post removal

This in vitro study compared different ultrasonic vibration modes for intraradicular cast post removal. The crowns of 24 maxillary canines were removed, the roots were embedded in acrylic resin blocks, and the canals were treated endodontically. The post holes were prepared and root canal impressions were taken with self-cured resin acrylic. After casting, the posts were cemented with zinc phosphate cement. The samples were randomly distributed into 3 groups (n=8): G1: no ultrasonic vibration (control); G2: tip of the ultrasonic device positioned perpendicularly to core surface and close to the incisal edge; and G3: tip of the ultrasonic device positioned perpendicularly to core surface at cervical region, close to the line of cementation. An Enac OE-5 ultrasound unit with an ST-09 tip was used. All samples were submitted to the tensile test using an universal testing machine at a crosshead speed of 1 mm/min. Data were subjected to one-way ANOVA and Tukey's post-hoc tests (α=0.05). Mean values of the load to dislodge the posts (MPa) were: G1 = 4.6 (± 1.4) A; G2 = 2.8 (± 0.9) B, and G3= 0.9 (± 0.3) C. Therefore, the ultrasonic vibration applied with the tip of device close to the core's cervical area showed higher ability to reduce the retention of cast post to root canal.

Este estudo in vitro comparou diferentes modos de vibração ultra-sônica na remoção de pinos intra-radiculares fundidos. As coroas de 24 caninos superiores foram removidas, as raízes foram incluídas em blocos de resina acrílica e tratadas endodonticamente. Os espaços para os pinos intra-radiculares foram preparados e depois moldados com resina acrílica autopolimerizável. Após a fundição, os pinos intra-radiculares foram cimentados com cimento de fosfato de zinco. As amostras foram distribuídas aleatoriamente em três grupos (n=8): G1: sem vibração ultra-sônica (controle), G2: ponta do aparelho ultra-sônico posicionada perpendicularmente à superfície do núcleo e perto da borda incisal e G3: ponta do aparelho ultra-sônico posicionada perpendicularmente à superfície do núcleo na região cervical, perto da linha de cimentação. Uma unidade de ultra-som Enac OE-5 com uma ponta ST-09 foi usada. Todas as amostras foram submetidas ao teste de tração utilizando máquina universal de ensaios a uma velocidade de 1 mm/min. Os dados foram submetidos aos testes ANOVA e Tukey post-hoc (α = 0,05). Os valores médios de carga para deslocar os pinos (MPa) foram: G1 = 4,6 (± 1,4) A; G2 = 2,8 (± 0,9), B e G3 = 0,9 (± 0,3) C. Portanto, a vibração ultra-sônica aplicada com a ponta do dispositivo perto da zona cervical do núcleo apresentou maior capacidade de reduzir a retenção de pinos metálicos fundidos no canal radicular.

Estudo dos contatos oclusais em balanceio quanto a frequência, intensidade e método de avaliação em indivíduos jovens / Study of occlusal contacts in swing as the frequency, intensity and method of assessment in young individuals

Um fator importante no estudo da oclusão refere-se à correta detecção da presença de contatos oclusais no lado de balanceio, sua intensidade e localização. No entanto, a maioria dos estudos que se propuseram a detectar a presença de contatos em balanceio, o fizeram utilizando papel carbono em movimentos conduzidos de máxima intercuspidação até topo-a-topo. O objetivo deste estudo foi estudar a frequência de contatos oclusais detectados no lado de balanceio em 42 indivíduos jovens, com idade média de 26 anos comparando dois métodos: 1- durante o ato mastigatório, utilizando como material de registro uma mistura de verniz cavitário e pó de fosfato de zinco; 2- durante movimentos conduzidos, utilizando como material de registro papel carbono. A frequência de contatos oclusais no lado de balanceio durante o ato mastigatório e utilização de verniz, foi de 100%, sendo que 97 % dos pacientes possuíam contatos bilaterais e 3 % apresentaram apenas contatos unilaterais. A frequência de contatos oclusais no lado de balanceio para os mesmos indivíduos, porém, com a utilização de papel carbono e movimentos conduzidos foi de 76%, sendo que 64% dos pacientes possuíam contatos bilaterais, 12% apresentavam apenas contatos unilaterais e 24% dos pacientes não possuíam contatos. Com relação aos métodos empregados, a mistura de verniz cavitário e pó do fosfato de zinco mostrou um número maior estatisticamente significante de marcações comparado ao papel carbono. De acordo com a metodologia empregada, concluiu-se que o verniz se mostrou mais sensível e eficaz por detectar uma quantidade maior de contatos oclusais comparado ao papel carbono.

An important factor in the study of occlusion refers to the correct detection of the occlusal contacts in the balancing side, intensity and location. However, most studies that proposed itself on detect the presence of balancing contacts used carbon paper led movements in maximal intercuspal to topo a topo. The objective of this study was to evaluate the frequency of occlusal contacts in the balancing side in 42 young people, with a mean age of 26 years through two methods: 1 - during the masticatory act, using as registration material a mixture of cavity varnish and dust zinc phosphate, 2 - during movements performed, using as registration material carbon. And assess if the methods show similar results. The frequency of occlusal contacts on the balancing side during the masticatory act and using of varnish, was 100% and 97% of patients had bilateral contacts and 3% had presented only unilateral contacts. The frequency of occlusal contacts on the balancing side for the same individuals, however, by analyzing method with carbon and led movements was 76% and 64% of patients had bilateral contacts, 12% had only unilateral and 24 contacts % of patients had no relation to contacts. Regarding the method study, it presented statistical differences between the methods, regardless of the side studied. All differences point to a greater number of contacts on the coating method, indicating that in general this method detects more markings than the carbon method. According to the methodology, it concluded that the method was more sensitive varnish that carbon method for being able to detect more numbers occlusal contacts than carbon.

Comparison of effect of desensitizing agents on the retention of crowns cemented with luting agents: an in vitro study

PURPOSE: Many dentists use desensitizing agents to prevent hypersensitivity. This study compared and evaluated the effect of two desensitizing agents on the retention of cast crowns when cemented with various luting agents. MATERIALS AND METHODS: Ninety freshly extracted human molars were prepared with flat occlusal surface, 6 degree taper and approximately 4 mm axial length. The prepared specimens were divided into 3 groups and each group is further divided into 3 subgroups. Desensitizing agents used were GC Tooth Mousse and GLUMA(R) desensitizer. Cementing agents used were zinc phosphate, glass ionomer and resin modified glass ionomer cement. Individual crowns with loop were made from base metal alloy. Desensitizing agents were applied before cementation of crowns except for control group. Under tensional force the crowns were removed using an automated universal testing machine. Statistical analysis included one-way ANOVA followed by Turkey-Kramer post hoc test at a preset alpha of 0.05. RESULTS: Resin modified glass ionomer cement exhibited the highest retentive strength and all dentin treatments resulted in significantly different retentive values (In Kg.): GLUMA (49.02 +/- 3.32) > Control (48.61 +/- 3.54) > Tooth mousse (48.34 +/- 2.94). Retentive strength for glass ionomer cement were GLUMA (41.14 +/- 2.42) > Tooth mousse (40.32 +/- 3.89) > Control (39.09 +/- 2.80). For zinc phosphate cement the retentive strength were lowest GLUMA (27.92 +/- 3.20) > Control (27.69 +/- 3.39) > Tooth mousse (25.27 +/- 4.60). CONCLUSION: The use of GLUMA(R) desensitizer has no effect on crown retention. GC Tooth Mousse does not affect the retentive ability of glass ionomer and resin modified glass ionomer cement, but it decreases the retentive ability of zinc phosphate cement.

Surface roughness of orthodontic band cements with different compositions

OBJECTIVES: The present study evaluated comparatively the surface roughness of four orthodontic band cements after storage in various solutions. MATERIAL AND METHODS: Eight standardized cylinders were made from 4 materials: zinc phosphate cement (ZP), compomer (C), resin-modified glass ionomer cement (RMGIC) and resin cement (RC). Specimens were stored for 24 h in deionized water and immersed in saline (pH 7.0) or 0.1 M lactic acid solution (pH 4.0) for 15 days. Surface roughness readings were taken with a profilometer (Surfcorder SE1200) before and after the storage period. Data were analyzed by two-way ANOVA and Tukey's test (comparison among cements and storage solutions) or paired t-test (comparison before and after the storage period) at 5 percent significance level. RESULTS: The values for average surface roughness were statistically different (p<0.001) among cements at both baseline and after storage. The roughness values of cements in a decreasing order were ZP>RMGIC>C>R (p<0.001). After 15 days, immersion in lactic acid solution resulted in the highest surface roughness for all cements (p<0.05), except for the RC group (p>0.05). Compared to the current threshold (0.2 µm) related to biofilm accumulation, both RC and C remained below the threshold, even after acidic challenge by immersion in lactic acid solution. CONCLUSIONS: Storage time and immersion in lactic acid solution increased the surface roughness of the majority of the tested cements. RC presented the smoothest surface and it was not influenced by storage conditions.

Comparing the retention of cast posts cemented with three different kinds of cement / Comparação da retenção de pinos fundidos cimentados com três tipos de cimento

Objective: To check and compare the retention of cast posts cemented with three different kinds of cement. Method: Forty five 45 human permanent maxillary incisors were randomly divided into three groups of 15 teeth. Root canals were prepared for the cast posts up to 8.5mm in length. The cast post obtained randomly were cemented with the help of the three cements (Zinc Phosphate, Glass-ionomer and resin modified Glass-ionomer [hybrid] cement). After cementation, the samples were stored in a physiological solution for seven days, after which we concluded the measure of retentive strength with the help of the universal testing machine (Zwick num. 112627, Ulm-Germany). Results: The hybrid cement has the greatest means value for retention and it is 312.90 N. It is followed by the Glass-ionomer cement with 272.40 N, while the Zinc Phosphate has the least, at 312.90 N. The statistical analysis shows that there is a statistical difference in the retention strength between the Zinc Phosphate cement and the Glass-ionomer (p<0.01), between the Zinc Phosphate cement and the hybrid cement (p<0.01). Conclusion: A significant statistical discrepancy was not manifested between the Glass-ionomer cement and the hybrid cement even though the difference in retention strength for these two cements was around 40 N.

Objetivo: Verificar e comparar a retenção de pinos fundidos cimentados com três diferentes tipos de cimento. Método: Quarenta e cinco incisivos superiores permanentes humanos foram divididos aleatoriamente em três grupos de 15 dentes cada um. Os canais radiculares foram preparados para receberem pinos fundidos de até 8.5 mm de comprimento. Os pinos foram cimentados com um dos três tipos de cimentos a seguir: cimento de fosfato de zinco, cimento de ionômero de vidro e cimento de ionômero de vidro modificado por resina (híbrido). Após a cimentação, as amostras foram armazenadas em solução salina durante 7 dias e então submeti das à análise da força de retenção em máquina universal de ensaios (Zwick num. 112627, Ulm-Germany). Resultados: O cimento híbrido apresentou o maior valor médio de retenção (312.90 N), seguido do cimento de ionômero de vidro (272.40 N) e do cimento de fosfato de zinco (312.90 N). A análise estatística mostrou diferença estatisticamente significante nos valores de retenção entre o cimento de fosfato de zinco e o cimento de ionômero de vidro (p<0,01), e entre o cimento de fosfato de zinco e o cimento híbrido (p<0,01). Conclusão: Não houve discrepância significativa entre o cimento de ionômero de vidro e o cimento híbrido, embora a diferença na força de retenção entre os dois materiais tenha sido de aproximadamente 40 N.

Actualizacion: deficiencia de hierro y zinc en niños / Update: iron and zinc deficiency in children

ivel mundial, en Bolivia el 82% de los niños de 6 a 23 meses son anémicos. El retardo de crecimiento es un problema frecuente en países en desarrollo, el 32% de los niños bolivianos lo sufren, esta prevalencia es la más altade Sudamérica.